PRODUCTS

Exurolux manufactures a wide range of parabolic reflectors such as:

  • 600 x 600 mm louvers

  • 300 x 300 mm louvers

  • 150 x 600 mm louvers

  • 300 x 1200 mm louvers

  • 600 x 1200 mm louvers

These are used for 18W / 36W fluorescent lamps and compact fluorescent lamps.

 

 
We also manufacture Parabolic louvers for T5 Lamps such as:
 
1x14W 2x14W 3x14W 4x14W 1x28W 2x28W
           

Eurolux - Lighting Product Range

Model / Size Applications Photometric Data
4 x 18 Reflectors Suitable for light fitting for 600 mm x 600 mm Armstrong ceiling grid 4x18.pdf (609 KB)
2 x 36 Reflectors Suitable for light fitting for 300 mm x 1200 mm Armstrong ceiling grid 2x36.pdf (781 KB)
2 x 18 Reflectors Suitable for compact fluorescent lamps.
 
 -
Parabolic Reflectors For Air Craft Lightning Systems
 
 -
 
 
Specification Sheet
Type
Ref
Alloy Finishing Hardness Minimum
Tensile
Strength
(N/mm
2)
Minimum
Yield
Strength
(N/mm
2)
Minimum
Elongation
A
10A5
Specular
Reflectance
Total
Reflectance
Total
Reflectance
TR-2
Diffuse
Reflec-
tance
Iridescence

 

long trans
090 Al. 99.85 specular
standard
H 18 125 105 2 79 78 85 85 15 1
100 Al. 99.85 specular
brilox 1
H 18 125 105 2 82 80 85.5 86 12 2
101 Al. 99.85 specular
brilox
H 18 125 105 2 83 81 86 86 10 2
103 Al. 99.85 specular
mirror
H 18 125 105 2 83 82 86 86 8 3
106 Al. 99.90 specular
reflex
H 18 125 105 2 85 84 87 87 7 3
16/HB Al. 99.90 specular
reflex EV
H 18 125 105 2 86 86 >90 >90 6 4
110/2 Al. 99.98 specular
bright
H 18 125 105 2 85 85 87 87 7 4
120/2 Al. 99.90 reflector
matt
H 19 140 120 1 63 50 84.8 85 75 3
120/4 Al. 99.90 reflector
matt
H 19 140 120 1 59 37 84 85 77 4
121/2 Al. 99.70 reflector
matt
H 19 150 125 1 60 45 83.2 84 75 3
121/4 Al. 99.70 reflector
matt
H 19 150 125 1 45 30 83.8 83 77 4
125/2 Al. 99.90 lumenal
matt
H 19 125 105 2 70 68 85 85 65 3
125/4 Al. 99.90 lumenal
matt
H 19 125 105 2 68 60 81.3 85 66 4
130 5005 reflector
diffuse
H 14 125 105 2 40 12 83.5 83.5 78 2
130/3 5005 reflector
diffuse
H 14 125 105 2 30 8 83 83 80 4
138 Al. 99.80 reflector
diffuse
H 18 125 105 2 65 35 85 85 72 2
145 5005 semi
specular
H 26 150 125 3 50 45 84 83 45 3
210 Al. 99.85 stucco 0/H 18 65/140 20-120 20/1-2 - - 83 83 82 2
230 Al. 99.85 ham-mered H 18 125 105 2 - - 85 85 84 2
235 Al. 99.85 ham-mered
convex
H 18 125 105 2 - - 85 85 84 2
236 Al. 99.85 ham-mered
36B
H 18 125 105 2 - - 85 85 84 2
250 Al. 99.90 rigato
satinox
H 14 140 120 1-2 - - - - - 4
   
Above information is based on up-to-date result. Values are measured on 0.5 mm in natural color. Physical characteristics of the materials are in accordance with EN (European Union Standards.)
   

SPECULAR REFLECTANCE (ISO 7668)
Measurements are made with Dr. Lange Refo3-D reflectometer

TOTAL REFLECTANCE (DIN 5036)
Measurements are made using a 50 cm Integrating sphere in our San Giuliano laboratories

TOTAL REFLECTANCE AT 300 (US spec.)
Measurements are made with the Technidyne TR2 integrating sphere

DIFFUSE REFLECTANCE
Measurements are made using our 50 cm Integrating sphere with a specular exit port

TOLERANCE
Gauge tolerance:         0.03 mm
Width tolerance:           0.15 mm
Sheet tolerance:           ±1 mm/m

EUROPEAN NORM STANDARDS (EN) FOR ALUMINIUM ENTE NAZIONALE ITALIANO DI UNIFICAZIONE (UNI)
Alloys                                          UNI-EN 573/3/96
Strength Properties                     UNI-EN 485/2/96
Measuring Standards                  UNI-EN 485/4/95

TEST STANDARD FOR ANODIC OXIDATION
Microscopic measurements of Oxide Layer per UNI EN ISO 1463/98

IRIDESCENCE CLASSIFICATION
1= Controlled
2= Low
3= Very low
4= No iridescences

   
NOTE
All materials listed above can be delivered in various sizes and forms according to customer requirements.
   
        CONVERSION TABLE (width 1000 mm)         CONVERSION TABLE (width 1250 mm)
thickness mm 1 metre = Kg 1 Kg = metres
0.3 0.810 1.235
0.4 1.080 0.925
0.5 1.350 0.741
0.6 1.620 0.618
0.7 1.890 0.529
0.8 2.160 0.463
1 2.700 0.370
thickness mm 1 metre = Kg 1 Kg = metres
0.3 1.012 0.988
0.4 1.350 0.741
0.5 1.688 0.593
0.6 2.025 0.494
0.7 2.362 0.423
0.8 2.700 0.370
1 3.375 0.296
 

 
Vega - Technical Data
  Type Total
Reflectance %
ASTM E 1651 DIN 5036-3
Specular
Reflectance %
600 long 600 trans
Diffuse
Reflectance %
DIN 5036-3
Iridescence
Vega 95100 Specular ≥ 95 ≥ 95 90 89 < 11 Absent
Vega 95110 High Specular ≥ 95 ≥ 95 91 91 < 6 Absent
Vega 95120 Reflector matt ≥ 94 ≥ 94 70-80 55-65 80-90 Absent
Vega 95125 Lumenal matt ≥ 95 ≥ 95 81-84 81-84 60-70 Absent
Vega 95138 Mill Finish ≥ 94 ≥ 94 65-80 25-45 85-92 Absent
Vega 95145 Semi Specular ≥ 94 ≥ 94 70-82 70-82 40-55 Absent
 Vega 95210 Stucco ≥ 950 ≥ 950 not relevant 94 Absent
 Vega 95230 Hammered Pattern ≥ 950 ≥ 950 not relevant 94 Absent
 Vega  95236 Large Hammered Pattern ≥ 950 ≥ 950 not relevant 94 Absent

- Measured before patterning

 
Vega - Qualities and Mechanical Values
  Alloy Pure
aluminium
layer %
Hardness Minimum
tensile strength
(MPa)
Minimum
proof stress 0.2%
(MPa)
Minimum
Elongation
A10A5
Vega 95100 1085 99.99 H 18 125 105 2
Vega 95110 1090 99.99 H 18 125 105 2
Vega 95120 1090 99.99 H 19 140 120 1
Vega 95125 1090 99.99 H 18 125 105 2
Vega 95138 1080 99.99 H 18 125 105 2
Vega 95145 5005 99.99 H 16 165 145 2
Vega  95210 1085 99.99  H 180  1250  1050  20
Vega 95230 1085 99.99  H 180  1250  1050  20
Vega 95236 1085 99.99  H 180  1250  1050  20
- Measured before patterning
 

All information provided is based on up-to-date values where possible Open values are overage result from 0.4 mm metal and are published for guidance only they may very according to row material thickness. For more detailed information please contact our technical sales department Physical characteristics of the materials are in accordance with EN (European Committee for Standardization).

Specular Reflectance (ISO 7668)
Measurements are made with Dr. Lange REFO  3 D reflectometor

Total Reflectance (DIN 5036-3)
Measurement are made using a 50 cm integrating sphere (Union Globe)

Total Reflectance At 300 (ASTM E 1651)
Measurements are made with the Technidyne TR2 integrating sphere

Diffuse Reflectance
Measurements are made using our 50 cm integrating sphere with 0 specular exit port

European Standards (EN) For Aluminium Ente Nazionale Italiano Di Unificazion (UNI)
Alloys                                 UNI-EN 573/3/96
Mechanical Properties          UNI-EN 485/2/96
Measuring standards            UNI-EN 485/4/96

Test Standards For Anodic Oxidation
Microscopic Insurement of Oxide Level UNI EN ISO 1463/96

General Tolerance
Gauge tolerance:               = 0.03 mm
Width tolerance:                = 0.15 mm
Length-cut shoots              = 1 mm

Note
All materials listed above can be delivered in various size and shapes according to customer requirements. Product with protective tape are guaranteed for the months after delivery if they are store in a conditioned room (temperature 20;30șC and relative humidity 50-60%) and kept away from sunlight and any heating source. Protective tape is not UV resistant.

 

 
   

4x18 T5 louver

4x18 T8 louver
   

2x36 T5 louver

2x36 T8 louver
   

T5 Sample